Tapping tee for pipelines under pressure

Use: Tapping tee into a pipeline under are used to do a water intake from an existing pipeline. Tapping under pressure into the pipeline with drinking water is possible. Installation is quick and easy. No welding. You need one wrench and a pair of arms.

Sale from 1 pc	Free delivery to transport company	Manufacture in 72 hours	Customizable non-standard tees	100% quality

Tapping tee with a flange

Working range (outer diameter): from 100 mm to 1224 mm; 

Standard lengths: 300mm, 400mm, 500mm, 600mm; 

Cutting flange diameter: DN 50, DN 80, DN 100; 

Intake pipe length: 150 mm; 

Working pressure: 3 - 16 MPa 

Working temperature: up to 150 °C/ 

Description:  Tapping tee is structurally similar to the stainless steel repair clamp, only it is equipped with a water outlet with a flange and the bandage is made of thicker metal.

The tapping tee consists of a body, a rubber seal, a cap and hardware. 

. The body consists of a bandage, a water intake pipe, a flange and a locking part. It is a one-piece stainless steel structure (08X18H10 or AISI 304), welded in argon and passed a three-stage chemical passivation for additional protection against corrosion of welds.

2. A rubber seal with a waffle-type inner surface, into which a stainless-steel insert is pressed, is attached to the inner wall of the bandage using special glue or reinforced adhesive tape.

The seal can be made from:

- EPDM ethylene-propylene rubber. Up to +70 °С (Standard version)

- H-EPDM high temperature ethylene propylene rubber. Up to +150 °С.

- NBR nitrile rubber. Up to +70 °С, interaction with oils, gasoline. 

All materials are suitable for tapping into drinking water pipelines.

3. Clamps, nuts and washers are made of stainless steel, protective caps are made of plastic.

Estimated service life is 10 years.

Tees have all necessary certificates.

See the price list below.

Tapping tee  with external or internal threaded outlet

Compression Range (pipe outer diameter): 44 to 1224 mm.

Standard lengths: 150, 200, 250, 300, 400, 500, 600, 800 mm/

Thread outlet sizes: 1/2", 3/4”, 1” ,1 1/4” ,1 1/2” ,2” ,2 1/2” ,3” ,3 1/2” ,4”.

Branch pipe length (for a tee with an external outlet): 150 mm.

Working pressure: 3-16 MPa/

Working temperature: up to 150°

PRODUCT PASSPORT Stainless steel tapping tee VZPA.docx

PRODUCT PASSPORT Stainless steel tapping tee VZPA.pdf

PRODUCT PASSPORT Tapping tee VZPA.docx

PRODUCT PASSPORT Tapping tee VZPA.pdf

Directory - External diameters of pipelines

Price list.xls 

All prices are current, include VAT and free delivery to the transport company.

Last price change: 18.10.2021.

Prices reviewed: 23.12.2021.